CWP - Cooper-Weymouth, Peterson *
Equipment & Systems
FEEDS
STRAIGHTENERS

EFT Straighteners
Pull Through
Precision Parts
Series B
Series C
Series D
Series 3.5
Series 64
Series 86

REELS
COIL PROCESSING SYSTEMS
COMPACT COIL SYSTEMS
PALLET DECOILERS
LEVELERS
COMBINATION EQUIPMENT
Cut-to-Length & Multi-Blanking Lines
AUXILIARY EQUIPMENT
News
About Us
Contact Us
Formtek
CWP Inventory
CWP Knowledgebase / Tips
EQUIPMENT & SYSTEMS
STRAIGHTENERS
Precision Parts Straighteners

Extreme flatness of parts to within .001" or .002" in most cases is readily achieved with the CWP precision parts straighteners. Small parts as thin as .010" can be flattened on our precision small parts straighteners, while larger fine blanked parts, clutch plates and laser burnt parts can be flattened on our larger precision parts straighteners or B&K levelers. With the upper straightener rolls set in one bank, straightener roll penetration is set by simple 2-point adjustment. Wider precision parts straighteners have backed up rolls to prevent roll deflection while maintaining their advantageous working diameters. Seventeen straightening rolls and two pinch/feed rolls are all powered to carry the parts all the way through without distortion or buckling.

 

8” small parts straightener with backed up rolls, Dial indicators and slope top cabinet

 

 

8” small parts straightener with backed up rolls, Dial indicators and slope top cabinet

 

 

17Roll Precision Parts Straightener with automatic lubrication

 

17Roll Precision Parts Straightener with automatic lubrication

 

 

 

 

17Roll Precision Parts Straightener with automatic lubrication

 

17 roll Precision Parts straightener with guards removed

 

 

17 Roll Precision Parts straightener with guards removed. This unit features a high lift head arangement and chrome rolls. This design allows the user to process critical finish parts more effectively

 




20” wide- 17 roll Precision Parts straightener with guards removed.

 

 

 

20” wide- 17 roll Precision Parts straightener input20” wide- 17 roll Precision Parts straightener output

 

 

 

 

 

                     Material In                                                          Material Out

B&K leveler designed to straighten and level parts up to .312” thick

B&K leveler designed to straighten and level parts up to .312" thick


                

Bookmark and Share


Hinckley Road, Clinton ME 04927, (207) 426-2351 FAX: (207) 426-8868
Formtek Logo
*
* EQUIPMENT & SYSTEMS | ABOUT US | CONTACT US | FORMTEK | HOME | SITE MAP    
Terms of Use Terms & Conditions Non-Machinery Terms & Conditions© Copyright 1998-2015 Formtek-Maine. All Rights Reserved.  
Yoder Mfg. Dahlstrom Iowa Precision Hill Engineering Lockformer Formtek Inc. Formtek Group Winpro Rowe Machinery B&K Levelers Tishken